how to attach balloon tape to the wall

Life hack “How to attach a garland without damaging your walls”

How I want the holiday to be a success, to give a lot of pleasant emotions and leave beautiful pictures in my memory.
Some turn to decorators, while others want to put their own efforts and imagination into decorating the upcoming holiday.

If you are from the second group, then these instructions will help protect your interior from improperly attaching balloons and garlands to the walls.

1. Scotch tape (regular and double-sided).

Pros: The easiest and most affordable way.

Cons: Not safe for your surfaces. When removed, it can tear off wallpaper or leave an adhesive layer on smooth surfaces (tiles, furniture, plaster, etc.).

Use very carefully or if you don't mind the surface.

Attach the garlands evenly in several places so that there is no more than 50cm between the fixation points.

2. Pins (studs, etc.).

Pros: They are less traumatic for soft wall coverings (various types of wallpaper, decorative foam tiles, etc.) than adhesive tape.

Cons: Not suitable for hard surfaces (plaster, paint, etc.). Spicy, NOT SAFE for children.

If you attach balloons this way, be extremely careful and use pins with a round tip. It is better to attach it behind a decorative element (ball, garland shape) so that it is not visible. The distance between fixations is 30-40cm.

3. Tape (fishing line, thread, ribbons, etc.)

Pros: Safe method, reliable.

Cons: Limited in mounting options.

Suitable for fastening, for example, to cabinets located at a distance from each other, through which a garland can be pulled on a ribbon. Or battery pipes, which can be located near the window in opposite corners; you can also hook a ribbon with a garland onto them.

To attach it to the battery with a satin ribbon, you need some kind of limiter so that your decor does not “slip” down.

Pros: Some models have a special tab for safe removal.

Cons: Cheap mounts like these stick very strongly to surfaces and can leave sticky marks or damage.

5. Blu-tack adhesive mass.

Pros: Does not leave marks even on wallpaper, can be easily removed. Great for paper garlands (for example, “Happy Birthday”), piece decorations (snowflakes, flowers, butterflies, etc.). Economical.

Cons: The only thing is the color. The adhesive mass has a bluish-blue tint and can be noticeable, so it is worth considering the possibilities of masking it.

You can buy it at construction stores.

7. Universal hooks (KREPS or Command from ZM).

Pros: Transparent, miniature, neat, made of plastic and secured with self-adhesive tape. Suitable for all surfaces.

Cons: None.

You can also purchase it at construction stores.

Let your holiday become a magnificent embodiment of the most daring ideas and a bright congratulation to the hero of the event.

Taking care of you and your holiday, the Charlotte team.

Source

How to choose colors and sizes

You can now buy balloons in any color. When choosing a specific option for decorating a garland, you should think in advance about the color scheme, which should:

Comply with the theme of the event;
Combine harmoniously with other space decorations.

You can choose interesting color combinations yourself or look at photos of ready-made garlands. It is optimal to use 2-3 colors.

The size of the balls should correspond to the dimensions of the room. For spacious halls, it is allowed to use garlands of large balls, but for an apartment it is better to use a medium or small size, otherwise the desired effect of lightness will not be achieved.

Installation of a garland of balloons

Mounting garlands has its own peculiarities. You need to mount it on smooth surfaces, because the balls easily burst from sharp corners and irregularities. The figure itself is tied using fishing line or tape; this is used when attaching it to walls or ceilings.

Usually they choose ledges, beams, slats or some kind of hooks on the walls where the figure will be attached, tie a long piece of tape or fishing line to them, wrap it around the balls and tie it in a knot. In order not to deform the composition, you need to tie the balls not very tightly, but you also don’t need to leave a lot of free fishing line so that the figure does not hang down or move from the wind.

If you do not find protrusions or hooks, then use special self-adhesive mounting pads with a hole. They are sold in construction stores. This fastener is small in size, can withstand a decent weight, and is hidden behind the entire structure. The adhesive surface is double tape; you need to peel off the film and secure the pad in the right place. You should not use such a platform on a dusty surface or on soft plasters, as they will peel off from these materials. It will be better if the area does not heat up. beautiful cable box for the wall

After securing the platform, you need to thread a fishing line or ribbon into the hole, first tie it in a knot, and then wrap it around the balls. To mount the structure, it is better to first glue the platforms themselves onto the work surface to mark the location of the garland, and then attach the composition.

The mounting pad adheres to the surface very firmly, so it is better to use it on decorations where dismantling is not required. If the decoration is dismantled, then the mounting pad is carefully peeled off using an office knife. Figure 1 shows a mounting pad with a self-adhesive base.

Another device for attaching compositions of balls is a furniture stapler; it is used to shoot a fishing line or tape for mounting to a wall or other surface. Image 2 shows an arch without a frame, mounted on vertical slats.

If you make a mistake with the fastening of the device, adjust the direction of the composition by changing the tension of the fishing line with which you tie the figure. When performing installation work with balls, you will need a safe stepladder for mounting on ceilings or vaults at the entrance. For ceilings 10-20 meters high, it is better to seek help from industrial climbers.

If you weave an arch on a frame, then you need the tube from which you prepared the frame to be smooth. If it has unevenness, it is better to wrap it with single-sided tape. When mounting a bulky arch on a frame that cannot stand stably vertically, you need to grab the frame with a fastening line, because the arch on the frame is heavier.

Look at the weaving of the arch on the frame. Arches and garlands up to 2-3 meters in height on a frame retain their shape on their own and often do not require additional installation. The garland on the frame at the entrance does not require additional installation.

Source

Cable landings

The second option is mounting pads for electrical wires based on double-sided tape.

These things are, of course, more reliable, but removing traces from such a sticky base is a pain.

Even on glass, not to mention other surfaces.

To remove this chemical completely and completely, without using a blade, you will have to purchase special removal products - Label off.

You can, of course, try a cheaper option in the form of alcohol or acetone. But such liquids can be very aggressive to some types of plastic and paint surfaces.

The principle of designing large gifts

To do this you need: a bucket, a lid, with a plastic pipe inserted into it. Moreover, you need to make two small holes in the lid and seal them with tape for a while. Next, you need a large balloon and a pump. You need to put a plug on the pump tip, which you should make yourself in advance; its size must correspond to the size of the tube.

How it's done:

We pull the ball onto the plug with a lid, lower the pump tube inside the ball.
We insert the tip of the pump into the hole so that the plug on the pump closes the tube like a lid. You need to inflate the balloon using the pump and then remove the pump.
Place the prepared interior design into the inflated balloon. There are also many ideas for interior decor - beautiful fabric, glitter, confetti, serpentine, cut out paper figures and much more. Then, place the gift itself. Also, if you need to place it at a certain height, use a fishing line.
Remove the adhesive tape from the holes in the lid and remove the ball from the neck. Remove the lid while holding the ball. Also, while holding the ball, carefully disconnect the ball from the pipe and remove the cover.
You need to inflate the balloon to the desired size, decide how high the gift will hang in the balloon, secure this height with fishing line, if you used it, and tie the balloon tightly.
Decorate the outside of the ball with ribbons, stickers, or paint with markers.

You can hide a toy or champagne in a ball

Beautiful garlands for the New Year

You can decorate your entire apartment with homemade garlands.
And the more garlands you hang around the house before the New Year, the better - so the feeling of the holiday will not leave you for a minute. Christmas tree, walls, windows, doorways, chandeliers - all this is used as a base for garlands. Decorate the entire wall with handmade Christmas trees, snowflakes and lanterns. Drag flags or a chain of paper rings around the perimeter of the room - and here it is, that same New Year from childhood.

There are so many options and ideas for making homemade garlands that everything is limited only by your time and imagination. You can make a classic vintage garland or an unusual modern one, modify the decorations using sparkles, LED strips or lanterns. The main thing is to start, and then you will no longer be able to stop and stop buying ready-made garlands in stores. And one more thing: homemade garlands are not always disposable. Some products will please the owners for a very, very long time, and not just for the New Year.

Kinds

Paper garlands are a strip with elements that are attached to each other or to a ribbon or thread. It is divided into types:

in connection with the material used - glowing ones with mains lights, paper and various raw materials;
in connection with the manufacturing method - volumetric, flat;
in connection with the event - decoration for the New Year, birthday, wedding, etc.
depending on the purpose – decor, zoning, etc.

Decor

In itself, this is a rather labor-intensive method. As a rule, the construction of the process of wrapping a gift in a ball depends directly on its size. In general, the entire registration process is divided into three parts:

Suckers

There is a simpler and cheaper method - silicone suction cups with a hook.

They are quite inexpensive and you can choose completely different sizes in stores. If you search, you will come across options without a hook, with a split in the middle.

The only drawback is that such suction cups stick and stick well only on a perfectly smooth surface. Namely glass, tiles in the bathroom or kitchen.

You can also try carefully sticking them to the stretch ceiling. And to this hook, if the light weight of the garland allows, attach some New Year’s decorations.

Pasting on wallpaper

As for paper wallpaper, even here, if used correctly, they can in principle be used. The most important thing is not to exceed the specified loads.

Here is a clear example of their use on paper wallpaper. Hooks can be glued onto them without any problems.

But when removing, again strictly follow the removal order. If you just try to tear them off, the top paper layer will also come off.

And if you pull parallel to the wall and very carefully, then they move away almost perfectly, without damaging the design.

Hot melt adhesive

The third method of fastening is a glue gun or so-called thermal nozzles.

However, gluing 5 meters of garland, and then tediously scraping off the adhesive from the wires with a knife, is still a pleasure.

Doubles

After all the balloons are inflated, you need to take 2 pieces. Take one ball in each hand and hold them by the ends, making sure that they do not touch each other. Pass one end over the other and then wrap twice. Tie the two ends with a strong knot.

Who helped Pugacheva become more popular than Rotaru: Sosedov’s opinion

From the word is salvation, from the word is destruction. Phrases that reveal a liar partner

The summer season is just around the corner: how to propagate currants on the windowsill